Resistor plate, fiberglass
Gear, 19-T pinion (32-p)/ set screw
Diff gear side plates/ ball joint plate
Decals, Tom Cat
Body bumper, foam
Motor cover
SPEED CONTROL TIE ROD
Battery stay brackets (2)
Antenna, spring (Tom Cat)
Screw set, self-tapping screws (black) (Tom Cat/ Spirit)
GRUB SCREWS & "R" PINS
Nut set, lock nuts (3mm (11) and 4mm(7)) & washer set
Screw set, machine screw & nut set (black) (Tom Cat/ Spirit)
Tool set (Tom Cat)
BATTERY RETAINER CLIP (NITRO)
THROTTLE SERVO MNTS(W/SCREWS)(
Housing, cush drive (front & rear halves)
Cush drive key/ pin/ elastomer damper (cush drive rebuild kit)
Cable ties, medium (black) (6)
Baffle cone, exhaust (1) (aluminum)
Rod guides (2)/ 3mm nylon locknuts (2)
Foam battery securing block
Servo mounts, steering (left & right)
Spring, throttle return (2) (Jato, T-Maxx 2.5R, 3.3)
AA BATTERY 4 PACK
Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
Rebuild kit, fuel filler bottle (includes bottle lid (1) and dispensing tube caps, rubber (2) (fits 8mm or 5/16" dispensing tube))
Brake disc (42mm steel)
Cover plates and seals, forward only conversion (Revo) (Optidrive blank-out plate, Optidrive sensor cover, shift fork cover)
Bellcrank bushings (plastic) (4x7x2.5mm) (4)
Nuts, 2.5mm nylon locking (12)
Springs, red (for Ultra Shocks only) (2.5 rate) (f/r) (2)
Screws, 3x25mm countersunk machine (hex drive) (6)
Screws, 3x36mm countersunk machine (hex drive) (6)
Screws, 3x20mm countersunk machine (hex drive) (6)
Wheel hubs, hex (2)/ axle pins (2.5x12mm) (2)
Screws, 3x21mm button-head machine (hex drive) (partially threaded, Revo brake bolts) (6)
End cap, carburetor body/ 6.2x1.2mm O-ring/ (1-each) (TRX 2.5, 2.5R)
Cush-drive elements (4) (EZ-Start 2)
Screws, 4x12mm cap-head machine (6)
Screws, 4x36mm cap-head machine (6)
Shoulder Screws, 4x25mm cap-head machine (6) (with 5mm shoulder for Monster Buggy)
Shoulder Screws, 4x30mm cap-head machine (6) (with 5mm shoulder for Monster Buggy)
Nuts, 6mm nylon locking (wheel nuts 1/6 and 1/5 scale) (5)
Motor mount hinge post/ 4x12mm BCS (1)/ 4x10mm CS with split and flat washer (1)
Brake disc (40mm steel)
Multi-tool (plastic)
Spacers, stub axle carrier (rear)
Cover, differential
Servo saver spring, heavy duty (for use with metal-gear servos)