Rocker arm set, progressive-1 (90-T) (use with #5318 or #5318X pushrod)
Rocker arm set, progressive-3 (90-T) (requires pushrods part #5319 or 5319X)
Rocker arm set, long travel (120-T) (use with #5318 or #5318X pushrod)
Suspension arm upper (1)/ suspension arm lower (1) (left front)
Skid plate set, front (2 pieces, plastic)/ skid plate, rear (1 piece, plastic)
Suspension arms upper (1)/ suspension arm lower (1) (right front)
Bumper, front/ bumper mount, front/ 4x10mm BCS (2)/ 3x25mm BCS (2)
Stub axle, CV style (machined steel) (1)/ cross pin (1)/ drive pin (1)
Cross pin (4)/ drive pin (4)/ set screw (4) (to rebuild 2 driveshafts)
Plate, motor (for single motor installation, use with gear cover #5677X)
LED lights, rear harness (6 red lights), Summit (1)/ wire clip (1)
Servo horns, steering and throttle (for non-Traxxas servos (Hitec, JR, KO, Airtronics))
Body mounts, front & rear/ body mount posts, front & rear/ 2.5x18mm screw pins (4)/ 4x10mm BCS (1)
Wheels, Hurricane 3.8" (chrome) (2) (also fits Maxx series) 5373 - revo 3.3, t->
Rocker arm set, progressive-2 (90-T)/ spacers (red aluminum) (8)
Wheels, Gemini 3.8" (chrome) (2) (also fits Maxx series) 5372 - revo 3.3, t->
Gear, locking differential output/ differential slider/ 3x12mm screwpin
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2)
Wheels, Gemini 3.8" (black chrome) (2) 5372A - revo 3.3, e-maxx,... lees meer >>
Push rod (aluminum) (assembled with rod ends) (2) (red) (use with #5359 progressive 3 rockers)
Push rod (alu) (assembled with rod ends) (use with long travel or 5357 progressive-1 rockers)