Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)
Wheelie bar mount (1)/ hardware (Stampede, Rustler, Bandit series)
Seal kit, receiver box (includes o-ring, seals, and silicone grease)
Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2))
Spur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)
Wheel hubs, hex (tall offset, Rustler/Stampede front) (2)/ axle pins (2.5x12mm) (2)
Steering blocks, left & right (2) (requires 5x11x4mm bearings)
Body mount, front & rear (black)/ body posts, 38mm (2), 25mm (2), 6.5mm (2)/ hardware
Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2)
Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel
Main diff with steel ring gear/ side cover plate/ screws (Bandit, Stampede, Rustler)
Half shafts, long truck (external-splined (2) & internal-splined (2)/ metal U-joints (4)
Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)